Description
Motion Constrained is proud to start supplying Ball Screw Linear Actuators. These are custom built to our specifications. Each Actuator comes with t-nuts for mounting, as well as a .25″ motor coupler. These are roller guided with radial bearings for support, a rolled ball screw and internally circulating nut. The body is made from extruded aluminum with machined aluminum end blocks and ball bearings. The mounting plate for the motor will accept either a Nema 17/ 42mm or a Nema 23 / 57mm frame. We offer these actuators in 100mm, 300mm, and 600mm length of travel.
| Make | Motion Constrained |
|---|---|
| Model | ACT-RG-42-BS-12-4-N23-100 |
| Series | ACT-RG |
| Screw Type | Rolled Ball Screw Drive |
| Nut Type | Internal Circulation |
| Screw Lead Accuracy | +/- 0.01mm / 300mm |
| Travel Length | 100mm |
| Screw Diameter | 12mm |
| Screw Lead Travel | 4mm – Per Revolution |
| Maximum Static Load Rating | 25 LBS / 11.3 Kg |
| Coupling to Screw | 5/16″ Pre-Mounted |
| Coupling to Motor | 1/4″ Bore |
| Motor Frame Compatibility | NEMA 17 – 42mm / NEMA 23 -57mm |
| Construction | Extruded Anodized Aluminum / Aluminum Machined Ends |
| Base Mount T-Nut | M4 |
| Base T-Nut Spacing | 20 mm |
| Slide Mount T-Nut | M6 |
| Slide T-Nut Spacing | 30 mm |
