Description
Motion Constrained offers the ACT-PG-80 ball screw linear actuator at a great price. These actuators are the lighter selection in our profile guided category of actuators, and are custom built to our specifications. Each actuator comes with t-nuts for mounting, as well as a .25″ motor coupler. The body is made from extruded aluminum with machined aluminum end plates and generic MGN12H linear bearings. The mounting plate for the motor will accept either a Nema 17/ 42mm or a Nema 23 / 57mm frame. We offer the ACT-PG-80 ball screw linear actuator in 600mm, 800mm, 1000mm and 1500mm length of travel.
| Make | Motion Constrained |
|---|---|
| Model | ACT-PG-80-BS-16-5-N23 |
| Series | ACT-PG |
| Type | Ball Screw Drive |
| Lead Accuracy | +/- 0.01mm / 300mm |
| Travel Length | 600mm, 1000mm, 800mm, 1500mm |
| Screw Diameter | 16mm |
| Screw Lead Travel | 5mm – Per Revolution |
| Maximum Static Load Rating | 150 LBS (68.03 KG) / 50 lbs (22.6 KG) vertical, 4 way load bearing |
| Critical speeds/max linear velocities | 600mm stroke – 3500 rpm and 10 in. per second 800mm stroke – 2000 rpm and 6 in. per second 1000mm stroke – 1480 rpm and 4.5 in. per second 1500mm stroke – 650 rpm and 2 in. per second |
| Included Shaft Coupler | 1/4″ Bore |
| Motor Frame Compatibility | Nema 23 / Nema 17 / 57mm Frame Servo |
| Bearing Type | Generic MGN12H Profile Guide Recirculating Ball Linear Bearing |
| Construction | Extruded Anodized Aluminum / Aluminum Machined Ends and Blocks |
