Motion Constrained ACT-PG-150-BS-20-5-N34 Ball Screw Actuator Linear Profile Guide

$289.99  –  $894.99

The ACT-PG-150-BS-20 is the heavyweight of our ball screw actuator line. This actuator is perfect for CNC routers, plasma cutters, and more.


Clear selection
Domestic US Locations get FREE SHIPPING! Part Number: act-150 Categories: , Tags: , ,

Description

The ACT-PG-150-BS-20 is the heavyweight of our ball screw actuator line. With two 20mm linear guides and two carriages per rail, 20mm ball screw, and mounting for a NEMA 34 stepper motor, this is an excellent choice for your CNC plasma cutter or router. The 150mm wide extruded aluminum frame makes installation simple and allows the actuator to be mounted in many different configurations.

*Please note the actual travel length is 75mm greater than nominal travel. This is due to the carriage mount, which is designed to ride over the journal mount and shaft coupler on the motor end, maximizing travel across the slide.*

Make Motion Constrained Model ACT-PG-150-BS-20-5-N34
Type Ball Screw Actuator Screw Diameter 20mm
Screw Lead 5mm Nominal Travel 300mm-600mm-1000mm-1250mm-1500mm 2000mm-2500mm
Actual Travel Lengths 675mm-1075mm-1325mm-1575mm 2075mm-2575mm Overall Length Nominal travel + approximately 255mm
Included Shaft Coupler 1/2″ Motor Frame Size NEMA 34 /  86mm
End Fixity Type Type B Linear Bearing Type 2 Generic HGH20 Linear Guide
Lead Accuracy/Backlash  +/- 0.03mm Rated Static Load /Mounting Position  650 lbs/Horizontal  200 lbs / Vertical
Construction Extruded Anodized Aluminum / Aluminum Machined Ends and Blocks Profile Width 150mm
Linear Velocities 300mm: 26 in/s
600mm: 10.75 in/s
1000mm: 5 in/s
1250mm: 3.25 in/s
1500mm: 2.25 in/s
2000mm: 1.25 in/s
2500mm: 0.875 in/s
Critical speeds/Max RPM’s 300mm: 10,000 rpm
600mm: 3800 rpm
1000mm: 1600 rpm
1250mm: 1100 rpm
1500mm: 775 rpm
2000mm: 450 rpm
2500mm: 300 rpm

Additional information

Weight 60 lbs
Dimensions 48 × 12 × 12 in
Nominal Travel (mm)

300, 600, 1000, 1250, 1500, 2000, 2500