Description
The ACT-PG-150-BS-20 is the heavyweight of our ball screw actuator line. With two 20mm linear guides and two carriages per rail, 20mm ball screw, and mounting for a NEMA 34 stepper motor, this is an excellent choice for your CNC plasma cutter or router. The 150mm wide extruded aluminum frame makes installation simple and allows the actuator to be mounted in many different configurations.
*Please note the actual travel length is 75mm greater than nominal travel. This is due to the carriage mount, which is designed to ride over the journal mount and shaft coupler on the motor end, maximizing travel across the slide.*
| Make | Motion Constrained | Model | ACT-PG-150-BS-20-5-N34 |
| Type | Ball Screw Actuator | Screw Diameter | 20mm |
| Screw Lead | 5mm | Nominal Travel | 300mm-600mm-1000mm-1250mm-1500mm 2000mm-2500mm |
| Actual Travel Lengths | 675mm-1075mm-1325mm-1575mm 2075mm-2575mm | Overall Length | Nominal travel + approximately 255mm |
| Included Shaft Coupler | 1/2″ | Motor Frame Size | NEMA 34 / 86mm |
| End Fixity Type | Type B | Linear Bearing Type | 2 Generic HGH20 Linear Guide |
| Lead Accuracy/Backlash | +/- 0.03mm | Rated Static Load /Mounting Position | 650 lbs/Horizontal 200 lbs / Vertical |
| Construction | Extruded Anodized Aluminum / Aluminum Machined Ends and Blocks | Profile Width | 150mm |
| Linear Velocities | 300mm: 26 in/s 600mm: 10.75 in/s 1000mm: 5 in/s 1250mm: 3.25 in/s 1500mm: 2.25 in/s 2000mm: 1.25 in/s 2500mm: 0.875 in/s |
Critical speeds/Max RPM’s | 300mm: 10,000 rpm 600mm: 3800 rpm 1000mm: 1600 rpm 1250mm: 1100 rpm 1500mm: 775 rpm 2000mm: 450 rpm 2500mm: 300 rpm |
